Now that your mobile phone is soaked how to save it is the big thing we will discuss these days every phone is their part of their life, it is quite true for many people anyway, and they won’t leave their room without it.
One the phone is soaked switch the mobile immediately secondly you need to remove the casing, and then remove the battery and remove the Sim card. Wash it thoroughly with clean water to get rid of any impurities such as salt etc.
Place close to a heat source ideally for roughly 48 hours, try the phone earlier if you need to but the longer it is left the more successful it will be.
You can use the heat source to dry it should be used that will melt the phone. Don’t place any heat source too proximal to the phone. You must keep the phone dried up and at room temperature or higher. A list of acceptable heat sources is below.
Many circuits inside the phone will survive captivation in water granted they are not attached to a battery when wet. To find out if the phone is really water spoilt, check the corner near where the battery is. If there is even little water left inside, it can damage your phone by corroding it and making the circuits flake or short out. Wipe down using a napkin or paper napkin, trying not to block the paper in the gaps and outlets of the phone. Keep wiping gently to remove as much of the residual water as possible.
If you want to try to remove the liquid out of the essential parts of the phone, attempt using a vacuum cleaner if there is one obtainable.
Do not use a dryer s it may force dampness further center toward the cracks, reaching the electrical parts deep inside the phone. If dampness is present deeper inside, corrosion and oxidation may result when minerals from liquids are placed on the circuitry which could ultimately cause component failure inside the phone.
An inexpensive option is to place the handset in a bowl or bag of raw rice overnight, Rice cereal, or just enclose the phone in paper napkins. The rice might absorb some leftover dampness.
If it is possible, it is quite preferred to use a desiccant as an alternative. Desiccants will soak up dampness better than rice. You can also try slipping the mobile inside a bag that can be preserved or a plastic container.
After you have waited at least 24 hours or longer if needed, make sure to see that every part of your cell phone is very clean and looks dry. You need to check all the ports, sections and in between ports for any dampness or dirt. Clean away any dust and dirt from the gadget and covers and rest in the battery into the phone. Endeavor to power on the gadget, listening for strange noises and observing to see if the phone appears to function accurately.
If your phone is powering up but doesn’t operate correctly after you’ve tried it, then it’s likely that you’ve missed some water or that corrosion has already occurred. Take away all the covers, battery, cards and other unrelated attachments again, and rub it gently with a clean dry toothbrush.
Nevertheless, you need to get it to a Service Center if it comes with a guarantee